Гусеничный экскаватор Sany SY95C

Basic Machine Data
Model: SANY SY95C compact crawler excavator (Tier4 Final / Stage V Export Version)
Operating weight (standard enclosed cab, 450mm steel tracks, standard arm + front dozer blade): 9180 kg
Standard heaped bucket capacity (ISO): 0.38 m³
Track shoe width: 450 mm triple grouser steel tracks; rubber track pads optional
Short rear tail swing radius: 1890 mm
Ground contact pressure: 38.6 kPa
Standard boom length: 3.92 m; Standard stick length: 1.70 m
Engine System
Engine Model: Yanmar 4TNV98CT inline 4-cylinder turbocharged water-cooled diesel
Displacement: 3.30 L
Gross power (ISO 14396 @2000 rpm): 53.7 kW (72 HP)
Max torque: 280 N·m @ 1800 rpm
Emission standard: Tier4 Final / EU Stage V with DPF passive regeneration
Fuel tank capacity: 240 L
Working modes: Power / Economy dual modes + auto idle system for fuel saving
Hydraulic System
Load-sensing flow-sharing hydraulic system
Dual variable displacement piston main pumps
Max total pump flow: 199.5 L/min
Main working relief pressure: 26.3 MPa
Swing circuit relief pressure: 21.5 MPa
Bucket breakout force (ISO): 64.6 kN
Arm breakout force (ISO): 53.5 kN
Independent auxiliary hydraulic circuit pre-installed for breaker, grapple, tilt bucket attachments
Travel & Swing Performance
Low travel speed: 2.9 km/h
High travel speed: 5.0 km/h
Slewing speed: 11 rpm
Maximum drawbar pull: 72 kN
Maximum gradeability: 35° (70%)
Hydraulic automatic track tension adjustment, sealed track chains
Track rollers per side: 5; Carrier rollers per side: 1
Working Range (Standard Boom & Stick)
Maximum digging depth: 4330 mm
Vertical wall digging depth: 3080 mm
Max ground-level horizontal reach: 6660 mm
Maximum digging height: 7250 mm
Maximum dumping height: 5280 mm
Minimum front swing radius: 1990 mm
Front Dozer Blade Parameters
Blade overall width: 2300 mm
Max blade lifting height: 420 mm
Max blade cutting depth: 480 mm
Equipped with float function for flat ground leveling
Overall Transport Dimensions
Total machine length: 6350 mm
Overall machine width (450mm tracks): 2300 mm
Transport height (cab top): 3200 mm
Minimum ground clearance: 360 mm
Track length on ground: 2320 mm
Service Fluid Capacities
Engine lubricating oil: 9.5 L
Coolant total volume: 12.5 L
Hydraulic oil tank capacity: 127 L
Each final drive oil: 1.2 L, two final drives total 2.4 L
Swing gearbox oil: 1.8 L
Operator Cabin & Standard Configuration
ROPS & FOPS certified fully enclosed vibration-isolated operator cabin
Standard factory air conditioning, adjustable high-back suspension seat
Pilot proportional joystick control, two operation patterns switchable
7-inch intelligent color monitor with real-time working data, fuel consumption statistics, fault self-diagnosis & anti-theft lock
Hydraulic safety lock lever, boom & arm load holding valves factory fitted
Sany Intelligent remote fleet monitoring system equipped
Centralized lubrication service points for simple daily maintenance