Сварочный агрегат VEB P10PN-S1

rated capacity 35.0 kVA 50% ED
throat 660 mm
plate thickness ca. 4.0 + 4.0 mm
control TE 90 MARK II
work height max. 820 mm
air consumption 1.0 L/Hub
air pressure 6.3 bar
tension force max. 2000 N
0 380 V
weight 275 kg
range L-W-H 1500 x 600 x 1500 mm

Welding control TE 90 is a microprocessor control for single-phase resistance
welding machines. The welding control has the task of controlling the machine
elements, especially the SCR, which controls the setting of the welding
current. The work cycle that the TE 90 carries out is described using the
programming parameters.

- Synchronous SCR control, welding time regulation by phase cut
- Simple programming using 4 buttons
- Current increase and pulsing
- Single point and automatic
- Compensation of the secondary current for welding dirty sheets and wires
- Welding time lock optimizes power consumption from the mains
- Solenoid valve 24 Vdc 7.2 W max. with short-circuit-protected output

Equipment:
- pneumatic spot welding machine from a training workshop
- including "BINZEL WK 43" circulating cooling unit (built in 2014)
- 1x freely movable foot switch
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.