Новый заливщик швов Strassmayr RWK 600/500 H

Cracksealing machine on trailer
STRASSMAYR RWK 600/500 H
assembled on homologated 2 axle trailer



















The Strassmayr RWK H crack-sealing machine is designed for easy preparation and dosage of special sealing compounds for the cracks, joints or road edges. The machine is mounted on a trailer and fitted with all necessary truck connections. The main tank walls are filled with thermal oil, allowing to work with sealing materials heated up to 200˚C. The horizontal mixer and heated grill located on the top of the boiler are ensuring constant delivery of the sealing compounds to the applicator lance without the risk of blocking the mixer operation while adding fresh blocks of material.

Chassis
o European homologation for the trailer allowing registration
o two-axle trailer with overrun brakes
empty weight of 2 400 kg
tow bar with hook height adjustment
hand parking brake
installation of road lightning

Main engine
KOHLER KDW1003
fulfilling exhaust emission regulation:
EPA Tier 4 final and EU Stage V
In-line 3-cylinder liquid cooled Diesel
engine power 18 kW
engine radiator with fan
hydraulic pump driving all the functions
hydraulic oil tank with filter and temperature/oil level indicator

Boiler
o horizontal mixer with hydraulic drive
providing best temperature equalization in whole capacity of boiler
providing best mixing of the sealing material
allowing filling up the material during operation
possibility of reverse in case of need
o initial grill placed above the mixer
with thermal oil in the temperature of about 260 deg C flowing inside
allowing preheating of blocks of material prepared to be added to the boiler
hard mass blocks are placed on the initial grid, where they are preheated and melted
allowing quick start of operation with smaller amount of material preheated
o effective amount of the material prepared about 500 l

Tank for fuel (diesel)
o tank capacity 60 l
Oil heating system
o automatically controlled heating system with RIELLO Diesel burner
heating pipe heated by heating oil burner (heating the thermal oil)
heating pipe is located between the walls of the boiler
protects against overheating of the material heated
o thermal oil heated furnace
the mass is heated over the entire surface of the walls of the boiler
capacity between the walls of the thermal oil boiler 185 liters
o pump for distribution of thermal oil with hydraulic drive
o system of three thermostats
one for thermal oil temperature adjustment
one for material temperature adjustment
one for security of the whole system

Crack filling set
o material pump for delivery of sealing material with hydraulic drive
type of material pump Steimel
material pump placed inside the boiler
easy and trouble-free system of dismantling of material pump set
o set for filling cracks
manual lance for delivery of the material to the spot
lance equipped with manual valve for opening and closing of material flow
valve with manual regulation of efficiency of material delivery
special hose with a length of 4 m
o compressor with a capacity of 80l/min
with hydraulic drive
pressed air tank with capacity of 20 liters
thread connection for connection of special hose when cleaning the pouring set
allowing easy and quick cleaning of special hose and manual delivery lance


Additional equipment

Hydraulic drive for a trailer
o hydraulic drive with steering gives the possibility of independent movement
of the machine at the construction site during the implementation of renovation works
o hydraulic drive for single front wheel
speed 0 - 3 km / h, infinitely variable
first axle of trailer lifted by self-drive of the machine on the jobsite
o hydraulic steering wheel located in the rear part of the machine
steering of the driven wheel with hydraulic cylinder
operator seat

Installation of edge sprinkling
o spraying ramp with 3 nozzles, max spray-width of 120 mm
ability to enable the individual nozzles
manual adjustment of pressure in the beam spray
spraying ramp heated with thermal oil
spraying ramp with manual slope adjustment

System of night-heating of thermal oil
o utilizing a two-stage Riello burner
separate thermostat for night heating control
230V wall plug connection to power the burner

System of additional heating of special hose
o 24V electric system of heating of special hose
dedicated generator with hydraulic drive
allowing heating of special hose up to temperature of 180oC

System of jobsite lights
o 2 LED lights assembled on special frame, lighting the area behind the unit
adjustable distance between the lamps
all necessary required electric connections